SRD-HD-12x12
600 MHz HDBaseT/HDMI 2.0 4K@60 12x12 matrix
Overview
The SRD-HD-12x12 is a high end-performance HDBaseT/ HDMI matrix that can handle 8 HDBaseT and 4 HDMI 2.0 inputs, and respectively, at the output side, 8 HDBaseT and 4 HDMI 2.0 outputs. All HDBaseT's Inputs/ Outputs, carry PoE to the connected Rx & Tx units.
Supporting HDMI 2.0, 600 MHz @ 60 Hz, YCbCr and RGB - 4:4:4 is possible by implementing VESA DSC 1.1 (Display Stream Compression) visually lossless compression.
In addition to that, on each HDBaseT input - RS-232 and Audio (unbalanced L/R) can be added to the stream, being outputted at a user selected output side.
The Audio is a studio grade 24 bit/ 48 KHz, based on analog-to-digital and digital-to-analog converters, which fully preserve the signal integrity of the original audio signal.
All HDBaseT inputs can be matrixed to any HDBaseT output with its' corresponding RS-232 & Audio signals.
HDBaseT In/ Out channels can be also carrying 10/100 Mbps Ethernet.
The SPDIF channel can output any Audio stream extracted from one of the user selected HDMI outputs.
The unit can be controlled/ configured either by LAN (Ethernet) or Console (RS-232) connections, it can be also controlled by an IR blaster channel, connected to the unit.
The unit is powered by 2 internal AC/DC power supplies, giving the system a full power redundancy protection.
New implemented technologies
- Implementing VESA DSC 1.1, to overcome BW limitations, and at the same time supporting visually lossless UHD AV applications
- Full matrixing of RS-232 and IR signals
- PoE on all HDBaseT inputs & outputs
Features
- Extends 4K Ultra HD (3840 x 2160 @ 60Hz, 4:4:4) up to 330 feet (100 meters) over a single CAT-5
- HDMI Features Supported:
- HDMI 2.0
- HDCP 2.2 and 1.4
- LPCM 7.1 audio, Dolby® TrueHD, and DTS-HD Master Audio™ pass-through
- 3DTV pass-through
- CEC pass-through
- Lip Sync pass-through
- HDTV compatible
- Supporting PoE on all HDBaseT Input/Outputs
- Two internal redundant AC/DC power supplies
- RS-232 and stereo Audio, on all HDBaseT Inputs/Outputs
- Audio DSP features
- All firmware updates can be done through the WEB, or via a dedicated mini USB connector on the unit
- OSD (On Screen Display) on HDMI outputs, for easy setup and adjustment
- Resolutions up to 4K @ 60 Hz @ 4:4:4 Chroma subsampling
- Extending signals (In & Out) over the HDBaseT channels – up to 100m (330 ft.)
- Built in a WEB server
- All control functions are handled via a user friendly GUI on the PC
Specifications
- Inputs: 8 x HDBaseT – RJ-45 + Led indicators, Power/HDCP: Blue/Amber
- 4 x HDMI – type A-19 pin, female locking
- 8 x RS-232 – 3-pin terminal Phoenix, female
- 8 x Audio – unbalanced stereo audio on a 3.5mm mini jack
- Outputs: 8 x HDBaseT – RJ-45 + Led indicators, Power/HDCP: Blue/Amber
- 4 x HDMI – type A-19 pin, female locking
- 8 x RS-232 – 3-pin terminal Phoenix, female
- 8 x Audio - unbalanced audio on a 3.5mm mini jack
- Ports: 1 x Optical SPDIF – Toslink connector
- 1 x Mini USB
- Control: 1 x Ethernet 10/100/1000 RJ–45
- 1 x RS-232 port for Console connection &
- 1 x IR – blaster connection – 5-pin terminal Phoenix, female
- Maximum audio level: unbalanced +4 dBu nominal
- Audio output THD: 0.01 %
- Audio output SNR: 90 dB
- Supported WEB browsers: Chrome, Internet Explorer, Mozilla Firefox, Safari, Opera
- Operating temperature: 0°C to 40°C (32°F to 104°F)
- Storage temperature: -40°C to +70°C (-40°F to 158°F)
- Humidity: 10% to 90%, RHL non-condensing
- Enclosure: Metal
- Dimension:
Width - 43cm (16.9")
Depth - 32cm (12.6")
Height - 8.5cm (3.4") - Environmental regulatory: Complies with appropriate requirements of RoHS & WEEE